Everyone would agree if archery is a fun activity and also has various benefits. In fact, for some people, archery is a hobby they always do. Some of the tools for doing archery can also be found easily on the market. One of the tools commonly used is bowstring. You can choose the best replacement bowstrings to be comfortable in carrying out archery activities.
However, for beginners, there are several basic archery techniques that should be well known. Some of the basic archery techniques referred to here are
1. Push-pull method
This method is used in straight and curved arcs. The rope is properly placed inside the notch from the lower side of the bow which is left quiet. One hand pulls the middle part of the bow out, while the other hand pushes it to force the side of the bow down. When the curve is obtained, the finger must clog the tip of the rope in the notch. The strap that has been installed must be checked, that is, in a straight line with the bow.
Archers must be careful in using this method because if you push it carefully the hands can slip, as a result, the bow can fly forward and can hit the face.
2. Follow step method
Place the lower wing in front of one leg and the bowstring is between the other legs. The archer pulls the upper wing forward over the thigh and inserts the string until the notch on the wingtip. Weaknesses of this method archers tend to often pull the upper wing towards the body into a straight line with a bowstring rope and naturally curved arcs.
3. Pull the bowstring
Pulling the bowstring (drawing), you can do the movement of pulling the bowstring to the chin, lips and or nose. Then proceed with anchoring the hand pulling the rope on the chin. There are three interesting movement phases, namely pre-draw, primary draw and secondary draw. Pre-draw is the initial pull movement. At this time the shoulder joint, elbow joint, and wrist joint are locked.